Many people are involved in the creation of the 'The Unknown Warrior' and without them, the Project would not have progressed as far as it has. This Roll of Honour gratefully acknowledges the following.
Note - We have improved the structure of this list and split it over two pages due to the number of sponsors. Some individuals names are repeated in both lists
They sponsored the following locomotive parts |
| P N Ackley | Plain axle |
| Horn guides (4) | |
| Cylinder cover patterns (2) | |
| Cylinder cover front casting (1) | |
| Cylinder liner castings (2) | |
| Copper stays (2) | |
| Large boiler tube (1), steel stays (2), rivets (2), bolt (1) | |
| J Acres | Crown stays (2) |
| K Adams | 2 lengths of copper pipe |
| P Adams | Steel stays (2), Copper stay (1) |
| Crown stays (2) | |
| P Akrill | Copper stay (1), steel stays (2), small boiler tube (1) |
| J Albiston | Steel stays (3) |
| D W Alder (Mrs) | Rivets (400) |
| D Anderson | Royal British Legion Crests |
| D Ansell | Crown stay (1) |
| Rivets (5) | |
| A Ashman | Copper stay (1) |
| C Baalham | Copper pipe |
| Crown stays (5) | |
| J Baguley | 9 metres of copper pipe |
| D Bailey | Crown stay (1) |
| R Ball | Crossbeam bridle (1) |
| D L Bamford | Completion & assembly of 3 piston rods, rings and castings |
| Machining of 3 pistons and rods | |
| Left & right side crosshead with gudgeon pin & bracket for union link | |
| Six-feed atomiser plus valves and adaptors | |
| Main steam pipe | |
| M Bannister | Hornguide (1) |
| I Barber | Steel stays (5) |
| Length of copper lubrication pipe (2) | |
| J Barrowdale | Rivets (6) |
| R Barrowdale | Brake gear fittings (2) |
| G Bartlett | Small tube (1) copper stay (1) |
| Copper stay (1) | |
| Crown stay (1) | |
| 3 metres of copper pipe | |
| Rivets(10) | |
| Steel stays (3) | |
| Lubrication pipe clip (1) | |
| T A Beavon | Copper stays (5) |
| C Beech | Crown stay (1) |
| Internal pipework supports | |
| D G Belcher | Tender chassis rivet (1) |
| J A Bennett | Spring hanger (1) |
| Bogie centre pin casting | |
| 4 lengths of copper pipe | |
| Copper stays (7), rivets (12) | |
| Crown stays (4) | |
| Crank pin (1) | |
| Transverse stay (1) | |
| Snifting valve (1) | |
| Brake gear fitting | |
| G Bentley | Piston (1) |
| Piston (1) | |
| Crown stays (4) | |
| Tender rear buffer beam - material | |
| Reverser wheel casting | |
| Internal pipe run (1) | |
| Palm stays | |
| J G Bentley | Crown stays (2) |
| M Benton | Steel stays (3) |
| D Berry | Small boiler tubes (3) |
| Crown stays (2) | |
| P Berry - In Memory of | |
| Staff Sgt Robert 'Bob' Simpson | Small boiler tubes (2) |
| M T Bibby | Tender chassis rivets (3) |
| L & J Bickerton | Copper stay (1) rivet (1) |
| E P Billups | Small boiler tube (1) |
| C Bleeker | Copper stay (1) |
| B Bloore | Sandboxes (3) |
| Poly pattern for cylinder rear cover | |
| Valve cover rear pattern | |
| Crown stays (10) | |
| Tender chassis rivets (10) | |
| Crown stays (5) | |
| R H G Bonar | Small boiler tubes (2) |
| P H Boot | Bogie frame plate and pattern for |
| spring hangers and spring hanger | |
| casting | |
| T Bounds | Copper stay (1), steel stays (3) |
| Tender chassis rivets (5) | |
| L S J Bowcutt | Small boiler tubes (14) steel stay (1) bolts (3) |
| I J Bowland | Small boiler tube (1) |
| K A B Bradley | Small boiler tubes (3) |
| D Bradshaw | Steel stays (5), copper stay (1) |
| R Braithwaite | Small boiler tubes (5) crank pin (1) |
| Valve cover front casing (1) | |
| 1 length of copper pipe, steel stays (2) | |
| Longitudinal stay (1) | |
| 6 metres of copper pipe | |
| Palm stay casting | |
| Crown stay (1) | |
| Brake gear fitting | |
| A M Bridge | Valve cover casting rear (1) |
| Copper stays (2) | |
| 1 length of copper pipe | |
| Bromborough Paints | Paint for frames |
| J Brooks | Front valve cover pattern & casting (1) |
| 4 lengths of copper pipe | |
| Transverse stays (2), Palm stay casting (1), and | |
| palm stay machining (1) | |
| Crown stays (20) | |
| Transverse stays (2) | |
| Brake gear fittings (5) | |
| Tender chassis rivets (20) | |
| Copper stays (30) | |
| Cylinder Fitted bolts (5) | |
| Rivets (50) | |
| R G Brooks | Crown stays (2) |
| A A Brown | Left hand lubricator body |
| Crown stay (1) | |
| Steel stays (5) | |
| Crown stay (1) | |
| Brake crossbeam (1), Copper stays (15) | |
| C M Brown | Shrink tyres to wheels and fit Gibson rings x 2 |
| Valve cover front pattern | |
| D J Brown | Crossbeam bridle (1) |
| I Brown | Crown stay (1) |
| M Brown | Copper stay (1), steel stays (2) |
| M Brown & family | Brake gear fitting (1) |
| D Brudenell | £95 oil boxes (2) |
| P T Bryant | Tender axlebox repair (1) |
| Rivets (400) | |
| Machine brake hangers (2) | |
| Tender axlebox repair (1) | |
| Crank pin (1) | |
| Spring hanger pins (8) | |
| Copper Tubes (5) | |
| C Buckley | Rivets (4) |
| Rivets (20) | |
| Rivets (5) | |
| D J Burditt | Steel stays (3) |
| Crown stay (1) | |
| Steel stays (4) | |
| Small boiler tubes (2) | |
| Steel stays (3) | |
| M Burrows | Small boiler tubes (3) |
| D H Butler | Front valve cover patterns (2) |
| Coupled Axle Spring (1) | |
| Copper stays (114) | |
| Steel stays (50) | |
| Crown stays (7) | |
| Transverse stays (4) | |
| Drain Cocks (4) | |
| Cylinder Cover Casting (1) | |
| Tender Rivets(8) | |
| T Butler | M/C brake hanger |
| J Buxton | Nameplates |
| A Byrne | 4 lengths of copper pipe |
| D Cain & A Smith | Steel stays (5) |
| J G Capey | Small tubes (4) |
| C Cartwright | Copper stays (2) steel stays (10) |
| R A H Casling | Outside steam pipe casting |
| Palm stay (1), rivets (7) | |
| Crown stays (4) | |
| Palm stay castings (2) | |
| Crown stays (4) | |
| Fitted bolts for cylinders (3) | |
| Driving wheel splasher (1) | |
| Tender chassis rivets (8) | |
| Tender chassis rivets (4) | |
| M Causton | Horn guide (1) |
| R G H Chapman | Palm stay (1), steel stays (17), bolts (4) |
| Copper stays (10), steel stays (10) | |
| Copper stays (4), steel stays (2) | |
| Rivet (1) | |
| Copper stay (1) | |
| Crown stay (7) | |
| Brake gear fittings (3) | |
| Fitted bolts for cylinders (2) | |
| D J Charlton | Philidas nuts (5) |
| A B Charlwood | Large boiler tube (1) |
| Valve rear cover casting | |
| Non return valve | |
| Reverser shaft trunion castings (2) | |
| Crown stays (2) | |
| Internal pipe run (1) | |
| Driving wheel splasher (1) | |
| G Charrot | Copper stays (5) |
| W Chester | Copper stay (1) steel stay (1) small tube (1) |
| K Chestney | Copper and steel stays |
| J R Clark | Rivets (10) |
| Rivets (10) | |
| Rivets (2) | |
| B Clayson | Philidas nuts (11) |
| K Clayton | Copper stay (1) |
| T Clowes | Philidas nuts (11) |
| Steel stays | |
| Valve liner casting | |
| Cylinder cover front casting | |
| Valve cover rear casing (1) | |
| Copper and steel stays | |
| Outside steam pipe casting (1) | |
| Palm stay casting (1) | |
| N S Clucas | Tender chassis rivets (4) |
| A Cluley | Fitted bolt for cylinder (1) |
| Stretcher 3 Casting | |
| Philidas nuts (10) | |
| C Cockroft | Driving wheel hornguide (1) |
| G A Cockroft | Crown stay (1) |
| Steel stays (10) | |
| Small boiler tubes (3) | |
| Copper stays(6) | |
| Rivets (2) | |
| Steel stays (12) | |
| Rivets (4) | |
| Crown stays (2) | |
| Steel stays (10) | |
| Lubrication system pipe clips (4) | |
| P Coggins | Small boiler tube (1) |
| A Collingwood | Brake gear fitting |
| A Colinson | Valve crosshead bracket casting |
| AA Collins | Copper stays (5) |
| Rivets | |
| Crown stays (10) | |
| D Collins | Smoke deflectors (2) |
| S A & G E Collins | Rivets (4) |
| N & S Collinson | Casting of 2 new crests |
| B Colthorpe | 30 metres of copper pipe |
| S P Cook | Cylinder liner casting |
| Coupled axle spring | |
| Tyre (1) | |
| Rear cylinder cover casting | |
| D Corker | Crown stays (2) |
| J N (Nick) Cotton | Pattern for spring hangers |
| £95 oil box (1) | |
| Valve rod bush nut (2) | |
| Lubrication system pipe clip (14) | |
| Copper stay (1) | |
| Rivets (5) | |
|
Tender rivets (4) |
|
|
Crank axle 100th part (1) |
|
| J Courtney | Crown stays (2) |
| R F Cowd | 3 metres of copper pipe |
| Rivets (4) | |
| Rivets (2) | |
| 3 metres of copper pipe | |
| Lubriction system pipe clip (1) | |
| N Cox | Crown stays (5) |
| D J Cudlip | Small tube (1) rivets (3) |
| Copper stays (2), rivets (2) | |
| Steel boiler stays (7) | |
| Philidas nuts (3) | |
| P N Cunliffe | Steel stays (2) |
| D d'Enno | Philadas Nuts (9) |
| Rivets (2) | |
| R Dalton | Bogie axle |
| Bogie equalising beams (4) | |
| J M Davenport | Rivets |
| Crown stay (1) | |
| P Davies | Copper stays (5) |
| J Dawson - | Drain cock (1) |
| in memory of Andy Dawson | Fitted bolt (1) |
| E Deering | Copper stay (1) |
| J M Dench | Rivets (15) |
| Copper boiler stays (8) | |
| Machine brake hanger | |
| £50 oil boxes (2) | |
| Crown stay (2) | |
| Internal pipework run | |
| Steel stays (4) | |
| 1 length of copper pipe | |
| Slide bar (1), bogie frame stay (1) | |
| Steel stays (4) | |
| Reverser shaft trunnion bearing (1) | |
| Reverser Nut Machining (1/50th Part) (2) | |
| Spring hanger pin (1) | |
| Brake gear fitting (1) | |
| Tender chassis rivets (5) | |
| Lubrication pipe clip (1) | |
| Fitted bolt for cylinders (1) | |
| R Dickinson - in memory of | Right hand front step & Horn guide pattern |
| C A Dickson | Crown stay (1) |
| Digitrains Limited | Transverse stay (1) |
| J H Dixon | Coupled axle spring (1) |
| Valve Rod Bush (1) | |
| Slidebar (1) | |
| Coupled axle spring (1) | |
| Fitted bolts (5) | |
| J W Dixon | Crank pin (1) |
| W J Dixon | Bolts (2) |
| Large boiler tube (1) small boiler tubes (6) | |
| Copper stays (50) | |
| 1 sandbox neck and tender axle box repair | |
| Plain axle (1) | |
| Palm stay machining and casting | |
| Safety valve | |
| K Dolan | Crown stays (2) |
| J S Donnelly | Steel stays (2) |
| Steel stays (6) | |
| Steel stays (4) | |
| P J Duncan | Crank pins (2) |
| Non return valve | |
| Fitted bolt for cylinder (1) | |
| T Dye | Crown stay (1) |
| G F Dyer | Crown stay (1) |
| Copper stays (5) | |
| Copper stay (1) | |
| Rivets (22) | |
| R Dyett | Left hand lubricator lid and body |
| S G Egbeare | Copper stay (2) and rivets |
| Steel stays (4) | |
| D T Eldridge | Machine bogie axle, rivets (2) |
| D Ellerton | Steel stays (4) |
| PD Elson | Horn guide for driving wheels (1) |
| Palm stay casting(1) | |
| J Evans | Spring hanger casting (1) |
| Copper stays (2) | |
| Bogie axlebox pattern | |
| Rivets (12) | |
| Rivets (30) | |
| Fitted bolt for cylinders (1) | |
| L M Evans | Reverser shaft trunion bearing |
| M G Evans (Maj. Ret RAOC) | Spring hanger casting (1) |
| Loco horn guide pattern (1) | |
| N C Ewart | 1 internal pipe run |
| H Excell - in memory of | Spring hanger casting (1) |
| P S Excell | Brake gear fitting |
| Steel rivets (30), tender chassis rivets (8) | |
| Cylinder fitted bolt (1) | |
| Rivets (10) | |
| Rivets (20) | |
| Tender chassis rivets (8) | |
| Rivets (10) | |
| D Faulkner | Rivets |
| C R Fenn | Large boiler tube (1) |
| R A Field | Crown stays (10) |
| I Filby | Rivets (4) |
| D Ford | Machining palm stay |
| J A Forrester | Copper stay (1) |
| D J Foster | Rivets (5) |
| D J Foster | |
| In memory of B W Foster | £50 oil boxes (2) |
| K Fox | Steel stay (1) |
| Foresters Friendly Society | Crown stays (2) |
| (1839 - Tunstall) | |
| C Y French (Miss) | Valve liner casing |
| Small tubes (6) | |
| Copper stays (5) steel stays (14) | |
| Brake gear fittings (7) | |
| Spring hanger casting (1), rivets (20) | |
| Non return valves (2), £50 oil boxes (2) | |
| Slidebars (3) | |
| Transverse stays (2), expansion link | |
| Steel stays (40) | |
| Longitudinal stay (1), Crown stays (2) | |
| Bogie wheel tyres (2) | |
| Slide bar (1) | |
| 12 Ton Box Van | |
| Tender chassis rivets (22) | |
| C Gardner (Miss) | Machine brake hanger |
| F N Gardner | Copper stays (5) |
| R W Gardner | Stays (2) rivets (2) |
| JA Gartside | Coupled axle spring (1) |
| Machining Wheel Centre (1) | |
| M Geeson | Small tube (1) |
| S Geeson | Small tube (1) |
| L A Gibbs (Mrs) | Copper boiler stay (1) |
| Copper stay (1) | |
| Steel stays (2) | |
| Copper stay (1) | |
| J P Gill | Coupled axle spring (1) |
| Frame Stretcher 2 Pattern (1) | |
| D Gledhill | Piston valve rods (3), safety valve (1) |
| W E Goodwin | Small boiler tube (1) |
| M Gordon | Valve cover rear pattern |
| Cylinder fitted bolts (2) | |
| T Gower | Brake gear fitting (1) |
| A Graham | Left hand lubricator lid |
| A Gray | Steel stay (1) |
| D Gray | Steel stay (1|) |
| F Gray | Steel stay (1) |
| L Gray | Steel stay (1) |
| S Gray | Steel stay (1) |
| B K Greally | Reverser shaft trunion bearing |
| Crown stays (5) | |
| J Greenwood | Cylinder fitted bolt (1) |
| P Gregory | Oil box and rivet |
| K Gronlund | Steel stays (4), rivets (4), bolts (22) |
| B Grundy | Small boiler tube (1) |
| L Hackshall (Miss) | Small boiler tube |
| R Hackshall | Spring hanger casting (1) |
| Steel boiler stay (1) | |
| Rivets (4) | |
| C M Hake | Foundation ring (part of) |
| D Hall | Oil box |
| D R Hall | Fitted bolt for cylinders (1) |
| Rivets (10) | |
| P Hall | Steel stays (3), copper stay (1) |
| D I Halsey | Small boiler tubes (3) |
| Spring hanger casting | |
| Horn guide for driving wheel | |
| Spring hanger pin (1) | |
| Crown stays (2) | |
| C Hancox | Bogie axlebox casting |
| D Hancox | Front buffer beam |
| N E Hathaway | Small boiler tube (1) |
| Copper stay (1) | |
| G Hayward | Rivets (25) |
| M P Heathcote | Copper pipe and steel stays |
| Tender Chassis Rivets (2) | |
| P Hellawell | Hornguide pattern |
| R Hellawell | Valve liner casing |
| G Henshaw | Cylinder liner casting |
| K M Hepworth (Mrs) | Steel stays (2), rivet (1), bolt (1) |
| C Hewitt | Tender axle box castings (6) |
| C H Hewitt | Valve crosshead bracket |
| T Hewitt | Crank axle web |
| J D Higham | Crown stays (2) |
| Crown stays (2) | |
| Crown stays (2) | |
| Fitted bolt for cylinder (1) | |
| Crown stays (3) | |
| Crown stays (4) | |
| Lubrication system pipe clips (10) | |
| Tender chassis rivets (10) | |
| Reverser shaft trunnion casting (1) | |
| J E Hines | Rivets (11) |
| G S Homer | Steel stays (4) |
| B Hudson - in memory of | Valve crosshead bracket |
| M Hudson | Copper stays (3), rivets (2) |
| Slidebar (1) | |
| N & A Hueting | £95 oil boxes (3) |
| £50 oil box (1) | |
| Transverse stay (1) | |
| D G Hughes | Second hand J type regulator pipe & one tender |
| axlebox repair | |
| Spring hanger casting (1), Copper stays (3) | |
| 2 internal pipe runs (boiler) | |
| Copper stay (1) | |
| Bogie check spring stay (1) | |
| I Hunter | Cab pressure gauge |
| Steel stays (40) | |
| Steel stays (20) | |
| D Hurley | Steel stay (1) |
| J Hutchison | Small boiler tube (1) |
| 3 metres of copper pipe | |
| A Inckle (Dr) | Cylinder cover front casting, copper stay (1) |
| A & S Inckle | Gibson ring (1) |
| S & P G Ison | Crown stays (5) |
| £50 oil boxes (4) | |
| A R Jackson | Copper stays (2) |
| Copper stays (5) | |
| B P Jackson | Valve end cover (1) |
| D A Jackson | 2 lengths of copper pipe |
| F Jackson | Driver's seat (part of) |
| Fireman's seat (part of) | |
| J Jackson | Wheel (1) |
| D W F James | Internal pipe run (1) |
| Crown stays (2) | |
| 9 metres of copper pipe. | |
| Copper stays (5) | |
| Sandbox lid | |
| Rear valve cover pattern | |
| Valve cover rear patterns (2) | |
| £95 oil boxes (2), rivets (2) | |
| Rear valve cover pattern | |
| Crown stays (2) | |
| Fitted bolt for cylinders (1) | |
| Palm stay casting (1) | |
| Crown stays (2) | |
| S Jarnell | Rivets (4) |
| Rivets (4) | |
| Rivets (4) | |
| G Jeffery | Steel stays (3) |
| P Jeffries | Steel stays (3) |
| H John | Boiler bolts (20) rivets (20) |
| J S Johnson | Piston Pattern (1) |
| R I Johnstone | Crown stays (23) |
| Fitted bolts for cylinder (10) | |
| Brake gear fittings (6) | |
| Driving wheel splasher fitting (1) | |
| Copper pipe, 9 lengths | |
| Cylinder Cover Casting (1) | |
| A C Jones | Copper stay (1) |
| D Kennedy & friends | Rivets (7), £50 RTP |
| Small boiler tube (1) rivets (5) | |
| Copper stay (1) small boiler tube (1) rivets (2) | |
| Copper stays (3), steel stay (1), bolts (3) | |
| P Kershaw | Rivets (12) |
| A J Killoran | Small boiler tube (1) |
| A A King | Live steam injectors (2) |
| N & K Kinsey | Driving wheel horn guide (1) |
| Cab pressure guage | |
| Rivets (10) | |
| J Kraushaar | Steel stays (4) |
| J Kyte | Cylinder fitted bolt (1) |
| M Kyte | Cylinder fitted bolts (2) |
| R Kyte | Cylinder fitted bolt (1) |
| J Lagou | Rivet (1) |
| L Langley (Miss) | Oil boxes (2) |
| Reverser wheel pattern | |
| Rivets (40) | |
| G Lawrence | Driving wheel horn guides (2) |
| Stretcher | |
| Copper stay (1) | |
| T Lawrence | Reverser shaft trunion casting (1) |
| G Leadbeater | Leaf spring for bogie |
| D Lilley | Copper stay (1) |
| J D Lilley | Steel stay (1) |
|
Copper stays (52) |
|
|
Philidas Nuts (10) |
|
| S Lindsay | Large boiler tube (1) |
| Steel stays (60) | |
| G H Loach (MBE) | Copper stays (2) |
| D Lovett | Small boiler tube (1) |
| Copper boiler stay (1) | |
| Copper pipe | |
| D Lowe | Cylinder fitted bolts (2) |
| 2 lengths of copper pipe | |
| J G Lowe | 2 x 3 metre copper pipe lengths |
| Cylinder fitted bolt (1) | |
| Tender chassis rivets (4) | |
| Crown stays (2) | |
| L R Lusby | Crown stay (1) |
| D Manley | Large boiler tubes (4) |
| J pipe | |
| Valve cover front pattern (1) | |
| Valve cover rear pattern (1) | |
| H C Manning | Tender chassis rivet (1) |
| D W Mark | Lubrication components |
| Fusible plugs (2) | |
| A J Marshall | Crown stay (1) |
| Copper stays (5) | |
| T J Marsland | Steel stays (3) |
| J Marson | Steel stays (4) |
| G Massey | Inside crosshead bracket casting |
| Fitted bolts for cylinders (6) | |
| Driving wheel splasher fittings (2) | |
| Brake gear fittings (4) | |
| E W R Mather | Rivets (10) |
| Steel stays (5) | |
| Copper stay (1) | |
| Steel stays (3) | |
| 1 length of copper pipe | |
| B Mathews | Palm stay pattern |
| Crown stay casting (1), stretcher casting (1) | |
| R Mathews | Copper stays (3) |
| A Mawer | Bogie check spring stay (1) |
| T Maynard | Bolt (1) |
| Cylinder fitted bolts (2) | |
| 3 x 3 metres of copper pipe | |
| S D McAuliff | Copper stay (1) |
| Rivets (2) Bolts (2) | |
| D McSorley | Rivets (10) |
| B Meadows | Rivets (4) |
| H Medcalf | Sandbox neck |
| P A Moody | Piston (1), copper stays (4) |
| A E Moore | Injectors complete with overflow valves (2) |
| Palm stay pattern | |
| C D Moore | Rivets (6) |
| D Moore | Machining palm stays |
| Spring hanger pins (6) | |
| Fitted bolts for cylinders (2) | |
| Rivets (310) | |
| Reverser shaft trunnion casting (1) | |
| Valve rod bushes (2) | |
| D Morris | Rivets (10) |
| Crown stay (1) | |
| Crown stay (1) | |
| Rivets (10) | |
| R S Morris | Steel stays (50) |
| Bogie leaf spring | |
| Refurbishment of locomotive buffers (2) | |
| Brake hanger (1) | |
| Cylinder valve liner casing | |
| Crossbeam - brake gear (1), steel stays (6) | |
| Pull rods - brake gear (4) | |
| E W Morton | Rivets (8) |
| Rivets (23) | |
| L J Moss | Small boiler tubes (2) |
| Copper stays (2) | |
| Valve cover rear pattern (1) | |
| Brake gear mounting stud (1) | |
| L J Mountjoy | Crossbeam bridle |
| E Muckley | Copper stays (5) |
| Tender chassis rivets (2) | |
| D Mulholland | Rear buffer beam |
| Tender restoration | |
| N Mundy | Small boiler tube (1) |
| Palm stay castings (2) | |
| N Mussett (MBE) | Copper stays (5) |
| Steel stays (15) | |
| Crown stays (2) | |
| J Muxworthy | Small boiler tube (1) |
| D Nash | Driving wheel axle box (1) |
| Loco axle box casting (1) | |
| Small boiler tubes (2) | |
| W Naylor | Steel stay (1) |
| A D Neale | £95 oil box (1), rivet (1) |
| G Neaum | Steel stays (2) |
| C Nice | Copper stays |
| R Nichols | Copper stay (1) |
| M Nield | Steel stays (4) |
| R Noakes | Crown stay(1) |
| M R North | Crown stays (8), rivets (10) |
| Rivets (20) | |
| Copper stays (5) | |
| Copper stays (7) | |
| E R Nourse Deceased (in memory of) | Copper pipe (15 meters) and 2 pipe clips |
| D Nugent | Eccentric half (1) |
| Valve and covers (2), 9 metres of copper pipe | |
| Internal pipe runs (2) | |
| Snifting valves (2) | |
| Crown stays (2) | |
| Brake gear fittings (6) | |
| Tender chassis rivets (8) | |
| Nuneaton Railway Circle | Left hand cylinder cladding sheet |
| In memory of Trevor Burdett | Left hand front step |
| D Nunney | Steel stays (2) |
| R O'Connor | Dragbox |
| R Oldham | Large boiler tube (1) |
| Steel stays (7) | |
| Copper boiler stays (3) | |
| P J Orgill | Coil springs (2) sandbox lids (3) |
| small boiler tubes (2) spring hanger | |
| pins (4) | |
| Drain cock Brackets (2) | |
| Valve cover front casting (1) | |
| Loco hornguide pattern (1) | |
| Steel stays (54) | |
| Bogie axlebox pattern / tender | |
| Rivets (150) | |
| Crown stays (6) | |
| Tender chassis rivets (36) | |
| 5 lengths of copper pipe | |
| Reverser shaft trunnion bearing (1) | |
| Rivets (34) | |
| Fitted bolts for cylinders (6) | |
| Axle box casting (1) | |
| Copper stays (10) | |
| Rivets (51) | |
| R Oswald | Small boiler tube (1) |
| G Pack - in memory of | Steel stays (4) |
| D Palfreyman | Spring hanger casting |
| M Parker | 3 metres of copper pipe |
| R T Parkes | Copper stays (2), steel stay (1) |
| G J Partridge | Small boiler tube (1) |
| J W Pauline | Fitted bolt for cylinder (1) |
| H Pead | Spring hanger |
| G R Pearson | Small boiler tube |
| J Pedder | Small boiler tubes (3) |
| A Percy | Large boiler tube (1) |
| Left hand lubricator body, copper stay (1) | |
|
|
Small boiler tubes (2) |
|
A Percy In Memory of David Kenneth Percy |
Fitted Bolt for Cylinder (1) |
| C J Perkins | Steel stays (10) |
| Crown stays (4) | |
| R E Pettit | Rear cylinder cover patterns (2) |
| D J Phillips | Bogie frame plate |
| J N Pickavance | Driving Wheel Splasher |
| D Pickersgill | Sandbox neck |
| N D Pittman | Large boiler tube (1) |
| L J Platt | Rivets (40) |
| D Plevey | Crown stays (2) |
| Tender rivets (2) | |
| D & R Plevey | 2 x 3 metres of copper pipe |
| D & R Plevey in memory of Colin | Tender chassis rivets (2) |
| D,R, N, A Plevey | Large boiler tube (1), copper stays (10) |
| M A Poole | Crown stays (4) |
| I Povall | Steel stays (10), copper stay (1) |
| Eccentric (1), copper stays (3) | |
| S J Pratt | Piston (1) |
| A S Price | Outside cylinder castings (2) and |
| cylinder cover | |
| J Procter | Tender Chassis Rivets (2) |
| J Randall | Valve cover |
| Cylinder pattern cover | |
| D Reader | Copper stay (1), rivet (1) |
| J & K Rees | Bogie axlebox castings (2) |
| A L Reid | Copper stays (8) |
| Crown stays (3) | |
| Internal pipe run | |
| Crown stays (2), tender rivet (fitted) (1) | |
| Driving wheel splasher fitting (1) | |
| P Reid | Rivets (30) |
| J R Rider | Small boiler tubes (3) |
| 1 length of copper pipe | |
| Crown stay (1) | |
| Fitted bolt for cylinder (1) | |
| On behalf of L Wright | Copper stay (1), steel stays (3) |
| Re - Col. L Wright | Crown stay (1) |
| In Memory of Edward Butcher, Royal Marines WWII | Tender chassis rivet (1) |
| In Memory of Capt Sir Tom Moore, Duke of Wellington's Regiment | Lubrication system pipe clip (1) |
| In Memory of Sgt Major Percy Asquith, The Argyles | Bolts (20) |
| In Memory of Ken Moseley RASC WWII | Bolts (20) |
| In Memory of Lt.Col. Peter H.G. Morgan RASC WWII 1920-2003 | Copper stays (2) |
| In Memory of Capt Michael Mousley Chindits WW11 | Lubrication pipe clip (1) |
| In Memory of C.P.O. David G Browning R.N. | Rivets (10) |
| In Memory of Arthur Shepherd 17.12.24 to 01.03.2024 | 1 length of copper pipe |
| A T Ridge | Copper stays (4), rivets (2) |
| Steel stays (3) | |
| R C Riley | Valve liner casing |
| A Roberts | Steel stays (50) |
| H O Roberts | Transverse stays (2) |
| Small boiler tube (1) | |
| Bogie wheel Gibson ring (1) | |
| G Robinson | Crown stays (6) |
| M Rotheram | Large boiler tubes (5) |
| D Rowe | Steel stays (4) |
| J G Rowbotham | Rivets (20) |
| in memory of Mrs M Rowbotham | Outside steam castings (2) |
| JA Rowlands | Steel stays (3) |
| J & A Preston, W Gwilt and | |
| Royal British Legion, Alsager Branch | Steel stays (10) |
| R Sant | Sandbox neck |
| S Sant | Crest / badge artwork |
| J Sandiford | Smokebox door |
| G D Scanlan | Small boiler tubes (3) |
| Steel stays (10) | |
| E Sekine | Palm stay (1) |
| C Sherratt | Copper stays (5) |
| 3 metres of copper pipe and 2 steel stays | |
| 1 length of copper pipe, steel stays (2) | |
| W R Sherriff | Crown stay (1), transverse stay (1), valve end cover (1) |
| Rivets (8) | |
| Tender chassis rivet (1), Copper stays (1) | |
| Drain Cock (1) | |
| 100th of crank axle (2) | |
| R Shortland | Copper stay (1), steel stay (1) |
| P Sikes | Crown stays (4) |
| Crest/badge development | |
| J S Silcock | Small tubes (10) |
| Copper firebox stays (10) | |
| D A Silkstone | Copper stays (5) |
| Crown stays (2) | |
| Crown stays (2) | |
| Rivets (4) | |
| Brake cylinder mounting studs (2) | |
| Copper stays (5) | |
| Tender chassis rivets (4) | |
| Crown stays (2) | |
| J Simpson | Small boiler tubes (4) |
| Cylinder bolt | |
| Steel stays (16) | |
| Rear sandboxes (2) | |
| Palm stay castings (2) | |
| Steel stays (10) | |
| Copper stays (17) | |
| Steel stays (10) | |
| Crown stays (4) | |
| Rivets (30) | |
| Tender rivets (4) | |
| M Simpson | Machine brake hanger |
| Crown stays (3), steel stay (1) | |
| M N Simpson | Crown stay (1) |
| D Singleton | Rivets (10), Steel stays (36), copper stays (5), small tube (1) |
| A Smith | 1 length of copper pipe |
| A Smith - see D Cain | |
| I Smith | Bolt (1) |
| Copper boiler stay (1) | |
| Rivets (3) | |
| K Smith | Copper stay (1), steel stays (2) |
| K A Smith | Small boiler tube (1) |
| M Smith | Large boiler tubes (3) |
| Cylinder lining casting (1) | |
| P J Smith | Copper stays (5) |
| Sandbox lids (2) | |
| V & E Smith (Misses) | Crown stays (2) |
| Copper stays (5) | |
| Bolt (1) | |
| Machine brake hanger, steel stays (2), bolts (2) | |
| Bogie axlebox pattern | |
| Outside steam pipe casting | |
| Rivets (8) | |
| Buffers (2) | |
| Nameplate and crest | |
| R Smithies | Reverser wheel casting |
| Valve lining casting (1) | |
| D Smithson | Bolt (1) |
| Copper crown stay (1) | |
| M Smithson | Copper crown stay (1) |
| B L Speake | |
| In memory of W R B Speake | Longitudinal stay (1) |
| G B Spencer | Small boiler tube (1) |
| R T Spybey | Copper stays (5) |
| M Staff & J Watchman | Small boiler tube (2) |
| P J Stanbridge | Small boiler tubes(6) |
| R S Standen | Copper stay (1) |
| Oil box (1) | |
| Steel stay (1) | |
| Steel stays | |
| Rivets (2) | |
| Steel stays (5) | |
| Crown stay (1) | |
| Brake cylinder stud (1) | |
| Lubrication pipe clip (1) | |
| J Stanek | Crown stay (2) |
| Lubrication system pipe clips (2) | |
| Herbert Stanton Trust | Steel stays (6) |
| P Steele | Rivet (1) |
| J Storey | Copper stays (2) |
| Stratford & Broadway Railway Trust | Cylinder and valve cover casting |
| A Strathie | |
| in memory of John "Jack" Strathie | 2 Machine Bogie Wheels |
| J Stretton | Nameplate splashers |
| Regulator | |
| S N Studham | Tender chassis rivets (4) |
| D Styles | Small boiler tubes (6) |
| A Sumner | Copper stays (4) |
| C Tasker | Buffers (2) |
| R Taylor | Driving sandbox (1) |
| R J A Taylor | Fusible plugs (4) |
| 3 metres copper pipe | |
| Brake gear fitting (2) | |
| I W Thomas | Rivets (3) |
| Steel stays (2) | |
| R M Thomas | Crown stays (10) |
| Crown stay (1) | |
| £5 rivets (3), tender chassis rivet (1) | |
| Rivets (4) | |
| Copper stays (2), steel stays (2) | |
| Stretcher pattern (1), crown stay (1) | |
| Driving wheel horn guide | |
| Rivets (4) | |
| Rivets (8) | |
| Copper stay (1) | |
| Brake cylinder stud (1) | |
| Rivets (16) | |
| Lubrication system pipe clip (1) | |
| P Thompson | Small boiler tube (1) rivet (1) |
| S Thorp | Spring hanger casting |
| Front valve dyed casting | |
| Valve crosshead bracket casting | |
| Crown stay (1) | |
| Brake gear fittings (2) | |
| R Tibbits | 2 lengths of copper pipe |
| Crank Axle (100th part) | |
| D Tollitt | Small boiler tube (1) rivets (3) |
| Brake gear fittings | |
| B Tomlinson | Rivets (2) |
| E P Tromans | Steel stays (3) |
| 3 metres of copper pipe | |
| J Turner | Small boiler tubes (10) |
| Copper stays (20) | |
| L H Turner | Steel stays (4) |
| 1 length of copper pipe | |
| R Turner | Rivets (8), 3 metres copper pipe |
| Rivets (4) | |
| Tender chassis rivets (2) | |
| Rivets (4) | |
| Tender chassis rivet (1) | |
| Steel stays (4) | |
| J Tyrrell | Copper stays (2) |
| W Twiss | Leading sandbox (1) |
| A Vassili | Brake gear fitting |
| M & R Vaughan | Rivets supply and fit (2) |
| M J Wakefield | Copper stay (1) |
| Rivets (50) | |
| A J Walker | Copper stays (9) steel stays (10) |
| D G Walker | Copper stays (2) |
| Crown stay | |
| Spring hanger pin (1) | |
| Valve rod bush nut (1) | |
| Transverse stay (1) | |
| K Walker | Palm stays casting (3) |
| M Walker | Rivets (3) |
| E Walsh | Copper stay (1) |
| J Walter | Copper stays (2) |
| R Ward | Tender rear buffer beam material |
| M Warr | Steel stay (1) |
| J Watchman (see M Staff) | |
| M Watson | Rivets (4) |
| G S Webster | Valve cover rear casting |
| Crown stays (4) | |
| Leading sandbox | |
| Crown stays (2) | |
| Internal pipe run | |
| N Wellings | Machining outside cylinders (2) |
| S Wells | length of copper pipe |
| K West | Casting of new crest |
| J Westall | Large boiler tube |
| K D Westall | Crank axle web (1) |
| P Westall | Reverser wheel casting |
| R S Westman | Copper stay (1) |
| K H Wheeldon | Rivets (8) |
| R Whitby | Crown stays (6) |
| D & K Whittle | Copper stays (3) |
| R J Wilcox | Copper stay (1), rivets (5) |
| Steel stays (13) | |
| Rivets (6) | |
| 3 metres of copper pipe | |
| Steel stays (3) | |
| Tender chassis rivet (1) | |
| Lubrication system pipe clip (1) | |
| J P Wild | Small boiler tube (1) |
| J Williams | Steel stay (1) |
| P R Williams | Piston (1) |
| Dome / pattern, casting and machining | |
| R L Williams | Copper stays (10) |
| P & K Wilson | Rivets (4) |
| W J Wilson | 3 metres of copper pipe |
| 1 Crown stay | |
| E Winfield | Eccentric half, copper stays (2), rivet (1) |
| Valve cover rear pattern (1) | |
| Non return valves (2) | |
| Crossbeam bridle | |
| Rear valve cover pattern | |
| Crown stays (10) | |
| Palm stay castings (2) | |
| Crown stays (2) | |
| Crown stays (4) | |
| Valve end covers (2) | |
| Crown stays (8) | |
| Internal pipe run, crown stays (3) | |
| Copper stays (20) | |
| Brake cylinder mounting studs (5) | |
| Copper stays (10) | |
| G Winkley | Horn guides (2) |
| Bogie frame plate | |
| A C Wood | Crown stays (4) |
| B R Woodward | Outside big end bearing |
| Big end bearing & No. 4 stretcher pattern | |
| Bogie centre pin machining | |
| D Worthington | £95 oil boxes (2) |
| Boiler palm stays (2) | |
| Palm stays (2) | |
| Palm stays (3) | |
| Internal boiler pipe support | |
| K Wright - in memory of | Copper stays (2) steel stay (1) |
| C Wright | Steel stays (5) |
| Small boiler tube (2) | |
| S Wright | Small boiler tube (1) |
| M E Yarker | Crown stays (3) |
| P Yarwood | Fitted bolt for cylinders (1) |
| M Yeomans | Rivets (100) |
HELP US GET MOVING BY JOINING THE ‘5551 CLUB’.
FUNDS RAISED FROM THIS INITIATIVE WILL ENABLE US TO COMPLETE MAJOR WORK ON THE MOTION.
 |
The second volume of Pete Sikes's fabulous pictorial record of the LMS Patriot Class. Featuring multiple photographs of each of the class from No 45526 to 45551 in their original form. (Over 100 images in total)
This book is a fine companion to Volume 1
ISBN 978-1-9995818-0-0
Published by: LMS-Patriot Company Ltd., Civic Centre, Riverside, Stafford, ST16 3AQ
Was £18.95 + £4.00 P+P
Now £10.00 + £4.00 P&P
Follow us  |
