Sponsorship

The LMS-Patriot Project is seeking sponsorship of components to help build 'The Unknown Warrior'. To date, many components have already been sponsored, which have contributed to the rapid progress of the new Patriot - 'The Unknown Warrior'. The sponsors are listed on the Roll of Honour page, to acknowledge their generous contribution to the Project.

If you would like to sponsor any of the following components available for sponsorship, please contact us. 

Boiler

•        Dome - Pattern £2,500 (No longer available)
•        Dome - Casting £1,100 (No longer available)
•        Dome - Machining £1,880 (No longer available)
•        Palm Stay Pattern £1,000 (No longer available)
•        Palm Stays £165 each (No longer available)
•        Palm Stays - Casting £100 (No longer available)
•        Palm Stays - Machining £500 (No longer available)
•        Rivets £5 each (thousands required)

       Bolts £1 (Many required)

•        Superheater - Pattern £2,500 (1 required)
•        Superheater - Casting £2,000 (1 required)
•        Superheater - Machining £2,000 (1 required)
•        324 Crown Stays £50 each (all now sponsored)
•        Internal Pipe Runs £150 each (all now sponsored)
•        Internal Pipework Support £600 (No longer available)
•        Longitudinal Stays £400 each (Old design) (No longer available)
•        10 Longitudinal Stays £2,200 each
•        Main Steam Pipe £3,000 (now sponsored)
•        2 Safety Valves £5,000 (all now sponsored)
•        Small Tubes £35 each (No longer available)
•        Transverse Stays £300 each (12 still required)
•        2 Fusible Plugs plus 2 spares £50 each (All now sponsored)
•        625 Copper stays £20 each (all no sponsored))
•        Outside steam pipe casting £288 each (no longer available)     

Frames

•        2 Locomotive buffers refurbishment £500 each (both now sponsored)
•        Front Step (LHS) £500 (now sponsored)
•        Front Step (RHS) £500  (now sponsord)
•        4 Horn guide patterns £300 each (all now sponsored)
•        12 Horn guides for driving wheels £250 each (All now Sponsored)
•        12 Spring hanger castings £200 each (All now Sponsored)
•        7 Spring hanger pins £60 each (now sponsored)
  
•        Stretcher 1 Pattern £200 (now sponsored)
•        Stretcher 1 Casting £795 (now sponsored)
•        Stretcher 2 Pattern £650 (now sponsored)
  
•        Stretcher 2 Casting £1,375
•        Stretcher 3 Pattern £395 (now sponsored)
•        Stretcher 3 Casting £637
•        Stretcher 4 Pattern £480 (Now sponsored)
•        Stretcher 4 Casting £2,500
•        8 Reverser shaft trunnion bearing casting £380 each
•        2 Sandbox necks £1,000 each (both now sponsored)
•        2 Rear Sandboxes (both now sponsored)
•        6 Driving Wheel Splasher Fittings £280 each (All now sponsored) 

Cylinders

•      2 Machining outside cylinders  £5,000 each (all now sponsored)
•      62 Fitted Bolts for cylinders  £100 each (all now sponsored)
•      2 Cylinder liner casting £800 each (all now sponsored)

Cylinder Covers

•      Rear cylinder covers polystyrene patterns £525 each (all now sponsored)
•      3 Cylinder cover castings rear £800 each (2 remaining)
•      1 Cylinder cover castings front  £480 each (all now sponsored)
•      2 Cylinder cover pattern front  £420 each(all now sponsored)
•      3 Front Valve cover pattern £340 each (2 available)
•      3 Rear Valve cover pattern £210 each (all now sponsored)
•      6 Valve end covers  £400 each (all now sponsored)
•      Rear Valve cover castings (all now sponsored)
•      Front Valve cover castings (all now sponsored)

Cylinder Fittings

•       3 Snifting valves £100 each   (all now sponsored)
•       6 Drain cocks - machining £400 each (2 available) 

Pistons, Valves & Valve Liners 

•        1 Piston - Pattern - £430 (now sponsored)
•        3 Piston - Casting - £385 each (now sponosred)
•        3 Piston – Machining - £450 each (now sponsored
•        3 Piston rods £1,500 each (all now sponsored)
•        3 Machining of Piston Rods £800 each (all now sponsored)
•        3 Piston Rod Assemblies £2000 each (all now sponsored)
•        6 Valve liner castings £340 each (all now sponsored)

Driving Wheels & Axles

•       1 crank axle at £10,000 (available in £100.00 tranches)
•       2 webs for crank axle at £1,750 each (none available)
•       6 tyres at £3,500 each (4 still available)
•       2 plain axles at £2,000 each (1 still available)
•       6 crank pins at £450 each (all now sponsored)

Motion

•      1 axle box pattern at £1,250
•      8 loco coupled axle springs £800 each (3 still available)
•      6 loco axle box castings £625 each (4 still available)
•      1 con rod forging £3,800
•      1 con rod machining £5,600 
•      Big end strap forging £2,154
•      2 Inside big end bearing half casting £810 each
•      1 Inside valve gear eccentric casting £280 each (now sponsored)
•      3 Piston rods £1,500 each (all now sponsored)
•      3 Reverser shaft trunnion casting £500 each (now sponsored)
•      3 Piston valve rods complete with piston rings £4,638 each (All now sponsored)
•      3 Valve Rod Bushes £500 each (now sponsored)
•      3 Valve Rod Bush Nuts £75 each (all now sponsored)
•      3 Tail Rod Bushes £750 each
•      3 Reverser shaft trunnion Bearings £380 each  (All now sponsored)
•      3 Pistons £320 each (All now sponsored)
•      1 Reverser nut machining £2,200 (available in £44.00 tranches x 50)
•      2 Machine Eccentric Halves £775 each
•      Eccentric halves £165 each (All now sponsored)
•      Eccentric halves - Machining £775 each (2 available)
•      2 Valve Crosshead bracket £260 each (All now sponsored)
•      2 Valve Crosshead Bracket Castings £400 (All now sponsored)
•      6 Slidebars £1,200 each  (All now sponsored)
•      Eccentric sheave assembly £1,588
•      2 Outside big end bearing £510 (both now sponsored)
•      Inside Crosshead Bracket Casting (now sponsored)
•      2 Outside crosshead bracket casting £1,270 each plus gudgeon pin & bracket £730 (both now sponsored)
  
•      Expansion Links £2,350 each (6 required)
•      Reverser Wheel Casting Pattern (now sponsored)
•      Reverser Wheel Casting. (now sponsored)

 Brake Gear

•      6 Brake hangers £354 each (all now sponsored)
•      3 Crossbeam £258 each (all now sponsored)
•      2 Crossbeam Bridle £225 each (now sponsored)
•      43 Fittings £70 each (all now sponsored)
•       4 Pull rod £250 each (all now sponsored)
•       6 Machine brake hangers £116 each (All now sponsored)
•       10 Brake cylinder mounting studs £40 each (all now sponsored)

Bogie

•        4 Equalising beams £1,500 each
•        2 Leaf springs  £1,000 each (No longer available)
•        Bogie centre casting £3,000 and £3,000 machining
•        1 Frame plates  £800 each (Now sponsored)
•        2 Bogie check spring stays £130 each (Now sponsored)
•        2 Bogie frame stays £575 each (1 available)
•        2 Bogie axle box casting £1,560 each (1 available)
•        Bogie axle box Pattern £200 (now sponsored)

 Bogie Wheels & Axles

•       2 Polystyrene patterns for the 2 bogie wheels £915 each
•       2 Steel castings for the bogie wheels £1,885 each
•       2 Tyres £1200 aech (now sponsored)
•       1 Axle £1450 (now sponsored)
•       Machine axle (now sponsored)
•       2 Machine Bogie Wheels £360 (now sponsored)
•       2 Push wheel centre onto Axle £540 each
•       2 machine wheel centres round & true £380 each)
•       2 machine bore of tyres for Gibson Ring fitting £590 each
•       2 supply Gibson Rings £320 each (now sponsored)   

Lubrication

•       Copper pipe (per 3 metre length) £36
•       Left Hand Lubricator lid    £90 (now sponsored)
•       Left Hand Lubricator Body £210 (now sponsored)
•       Non Return Valves (6) £100 each (now sponsored)
•       Oil Boxes 11 @ £50 each - all sponsored
•       Oil Boxes 11 @ £95 each - all sponsored
•       40 Lubrication System Pipe Clips £25 each (now sponsored)
•       Six Feed Atomiser, + Valves & Adaptors. £1,450 (now sponsored)

Tender

•       2 Tender axlebox repair £950 (both now sponsored)
•       3,000 Tender Chassis
•       Rivets - supply & fit - £25 each) - 2850 available      
•       Tender Rear Buffer Beam  Material £500 (sponsored)

Crest for Nameplate

•       Casting of 3 at £275 each (all now sponsored)

Vehicle

•      12 ton Box Van (part sponsorship accepted) £1,200 Now Sponsored